background image

Set Screw

Yoke

Downrod

Downrod 

Clip

Downrod 

Pin

Mounting Bracket Screw

5

ASSEMBLY INSTRUCTIONS

2

1

2. Loosen all four mounting bracket screws located on the 

mounting bracket and completely remove the two screws 

from the round holes in the canopy. Save the screws for 

later. Remove the canopy from the mounting bracket. 

Then, install the mounting bracket to the outlet box (sold 

separately) using the screws and washers provided with 

the outlet box. 

WARNING: 

To reduce the risk of fire, electric shock, 

or personal injury, mount to the outlet box marked 

“acceptable for fan support” and use the mounting screws 

and washers provided with the outlet box.

3. Remove the six motor screws from the underside of the 

motor assembly and save for blade arm installation. 

Note: 

The slot in the light kit allows access to the 

preassembled motor screws. 

4. Remove the downrod clip and downrod pin from the 

downrod. Then, loosen but don’t remove the two set 

screws at the top of the yoke.

1. Turn OFF the electrical power at the main fuse or circuit 

breaker.  

DANGER: 

Failure to disconnect the power supply prior to

installation may result in serious injury or death.

4

Slot

Light Kit

Note:

 View from underside of light kit.

Motor 

Screw

3

Summary of Contents for GIBSON STREET 20676












Reviews: