Page 10 of 16
FUNCTION AND OPERATION (continued)
23
24
25
26
23. Click fig.13 “Change existing
photo” to choose a desired
image on your device. Then
click “Cancel” back to
“Setting” menu list.
24. Click fig.13 “Rename light”
to enter a name for the
light, then click “Save”.
25. Click fig.8 “Restore factory
defaults” to restore your
settings (only the light name
and password) to the original
conditions.
Note: The photo’s settings
can’t be restored by
using this function.
26. Remove the device
from the light list.
Restore factory defaults
Note: 1. Manual control and App control independently.
2. The function which is executed is the lastest settings.
3. After a power cut or power outage, the function
of the light will revert back to the actual settings
of the switches on the fixture.
App settings will also revert back to the factory default.
4. For achieving the best performance, make sure
the wall switch is in “ON” state (daytime and nighttime).
190717
Cancel
