PREPARATION
Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with package
contents list and diagram on previous page. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement parts.
Tools Required for Assembly (not included): Screwdriver, Phillips Screwdriver, Pliers, Electrical Tape, Wire Cutters, Safety
Glasses, Ladder, Wire Stripper.
Page 2 of 9
DD
B
DD
A
A
EE
DD
1
2
Important to Know
1. This fixture requires a 120 VAC, 60 Hz power source.
2. For general safety and to avoid any possible damage to the sensor, be sure the power is switched "off" before adjustment.
3. Motion sensor: turns light ON automatically when motion is detected and turns light OFF automatically when motion stops.
4. Photocell keeps the light OFF during daylight hours.
Note: Fixture can be wall mounted or eave mounted.
Wall Mounted
Eave Mounted
Light fixture and sensor should be mounted as shown above when installed (depending upon type of installation)
Before installing the light fixture under an eave, the sensor head must be rotated as shown in the next two steps for
proper operation and to avoid the risk of electrical shock.
For eave mounted only:
Swing the sensor head towards the mounting bracket.
5RWDWHWKHVHQVRUKHDGFORFNZLVHÛVRWKHFRQWUROVIDFHGRZQ
Controls
Mounting Bracket
Controls
Controls
CC
AA
ASSEMBLY INSTRUCTIONS
Turn off the power at fuse or circuit box.
Installation Steps
1. The fixture mounting bracket(A) is
pre-assembled on the light fixture(B).
Unscrew both the decorative cover(DD)
and the fixture mounting screw(EE) in
order to remove the mounting
bracket(A).
2. Install the mounting strap(CC) to the
outlet box with the stamped
word “FRONT” facing away from
the outlet box, using two mounting
screws(AA) that best fit the outlet box.
Mounting bracket(A) should sit flush
against wall surface when secured.
(Choose one matching pair of suitable
mounting screws(AA) from the 3 pairs
provided).
FRONT