Understanding Hazard Signal Words:
WARNING
indicates a poten
ti
ally hazardous situa
ti
on that, if
not avoided, may result in death or serious injury.
CAUTION
indicates a poten
ti
ally hazardous situa
ti
on that, if not
avoided, may result in damage to the product.
READ ALL INSTRUCTIONS!
WARNING
:
Read these instruc
ti
ons. Consult a quali
fi
ed
electrician if you are not
certain about the installa
ti
on process. Always install wiring connec
ti
ons
in accordance with local code, ordinances and the Na
ti
onal Electrical
Code.
Before beginning to assemble or install ligh
ti
ng
fi
xture, make sure all
parts are present. Compare parts with package contents listed and
shown on page 1 and 2. If any part is missing or damaged, do not
a
tt
empt to assemble, install or operate the
fi
xture. Contact customer
service for replacement parts at 1 (800) 887-6326 between the hours
of 9 a.m.-5 p.m., Monday-Friday CST.
This light
fi
xture is designed to
fi
t standard junc
ti
on boxes as de
fi
ned by
the Na
ti
onal Electrical Code. Please contact a quali
fi
ed electrician if you
have any ques
ti
ons regarding the installa
ti
on.
Es
ti
mated Installa
ti
on Time: 30 minutes. Installa
ti
on
ti
me will vary
depending on skill level and exis
ti
ng wiring condi
ti
ons. Es
ti
mated
installa
ti
on
ti
me assumes that standard wall junc
ti
on box and supply
wiring are already installed.
Items Required for Assembly: Phillips screwdriver, slo
tt
ed screwdriver,
wrench or pliers, silicone caulking adhesive (not included)
Suggested Items to have on-hand: Wire cu
tt
ers and/or wire strippers,
step ladder (not included)
1
.
TURN OFF POWER. Turn OFF power to
circuit at main circuit breaker or fuse box.
CAUTION
Do not rely on wall switch alone to turn o
ff
power. See Fig. 1
2
.
ATTACH CROSSBAR.
Remove the crossbar
from behind
the lamp fixture. You will need to
loosen the two decorative nuts on
the front of the fixture to remover
the crossbar. Store the two decor-
ative cap nuts(D) in a safe place as
they will be needed later to mount
the light fixture after the crossbar is
installed. Attach the crossbar (C) to
the junction box with the screws (E)
provided. Adjust the length of the
studs if necessary. and secure them
with two lock nuts
fi
xture and the supply ground wire
to ground screw on the crossbar
(C) (ground screw maybe painted
green). Connect the white wire from
the junc
ti
on box to the white wire from
the
fi
xture by twis
ti
ng a wire nut (F) onto
the ends of the wires. Connect the
black wire from the junc
ti
on box to the
black wire on the
fi
xture by twis
ti
ng a
wire nut(F) onto the bare ends of the wires.
NOTE: In some cases the black
Page
3
Page
4
IMPORTANT SAFETY INSTRUCTIONS
PREPARATION
ASSEMBLY INSTRUCTIONS
ON
ON
ON
OFF
ON
ON
ON
ON
OFF
3.
CONNECT WIRES.
Connect
the bare ground wire from the
B
D
D
F
F
C
B
Stud
C
C
C
E
E
