ASSEMBLY INSTRUCTIONS
5
CARE AND MAINTENANCE
TROUBLESHOOTING
• Always be certain that electric current is turned off before cleaning this item.
• Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on
fixture, as it will damage the metal finish.
• For optic cleaning: Gloves should be worn while handling the optic assembly as finger oils may
damage the optics and affect performance. Optics should only be cleaned if necessary, and only
use a soft moist cloth with mild soap and water. Solvents should not be used as they may cause
damage to the optics.
Fixture does not light. 1. The power cord is not plugged in.
1. Plug in power cord.
2. The switch is not “ON”.
2. Turn Switch to “ON”.
PROBLEM POSSIBLE
CAUSE
CORRECTIVE
ACTION
3.
If interconnection cord (C) is being run from cabinet
to cabinet, a notch such as a “V” could be cut into
cabinet side panels to help keep cable out of sight.
4.
Plug the power cord (A) into fixture and then into
outlet.
Peel backing off retaining clip(s) (AA) and affix to
desired location(s).
3
C
B
4
AA
Hardware Used
Retaining
Clips
AA
x 3
