Product Setup
Before you use the dog training collar, you must set up the product as
outlined by the below steps:
1. Charge the remote and the receiver collar.
2. Prepare the remote and turn it on.
3. Prepare the receiver collar and turn it on.
4. Test the function of the buttons before putting it on a dog.
5. Familiarize yourself with how to use the test lamp, the shock
function, and screwdrivers
6. Pair the remote and the receiver collar, You may need to pair twice if
you lose the product code or have a second collar.
Charge the Remote and the Receiver Collar
1. Plug in and charge the remote and the receiver collar fully.
The initial charge will take up to 4 hours.
Subsequent charges will take 2-3 hours.
2. When fully charged, the red LED on the receiver collar will become
green. The battery display on the remote will stop cycling and
display full.
3. Please press back the rubber cover when the receiver collar is fully
charged.
Tips:
1. Excessive charging will shorten the life of your battery. Only charge the
device when the batteries are low.
2. When you're not using the collar, please turn it off to maintain battery
life.
Note:
Please use an Output: DC 5V 500-800mA charger to charge the product.
Do not use chargers that do not match the necessary specifications.
07
