background image

3. Connect the charger connectors to the Transmitter and 

1. Plug the charger into a standard wall outlet.
2. Lift the rubber covers protecting the Transmitter/Receiver 
Collar Charging Jack.

4. Connect the USB port to the Charging Adapter.
5. Charge the unit for 4 hours for the first charge. Recharges 

Receiver Collar Charging Jack, and as shown below.

take only 2-3 hours.
Note: The Battery Indicator on the Transmitter will scroll and 
the indicator light in steady red while charging; and the Battery 

flashes when fully charged.
The indicator light on the Receiver Collar will be in steady red 

Indicator will become steady, and the LED Indicator Light 

while charging and green light turned on when fully charged.
6. When charging is completed, remove the charger connector.

Charging the unit

The unit uses Lithium-Polymer batteries.
1. Charge the unit before using the unit for the first time.
2. Do not charge the unit near any flammable 
substances.
3. Fully charge if the unit is to be stored without use for 
a period of 3 months or more.

Receiver Collar Function

Normal operation 

- Low battery

Red LED Response

On for 3 seconds

Fl

ashe

s

  rapidlly

On length of 

VIBRA

/

SHOCK

 

button press

On length of 

charging

 

within

2

-

3

 

hours

Power off

Vibration/

Shock

Charging

Step

8

Recharge the unit if:
The indicator light on the collar is emitting a red color 
and flashes rapidly. 
The 3 bar indicator on the Transmitter LCD shows just 
1 bar.

Battery Charging Procedure
NOTE: The unit has a partial charge when it leaves our facility, 
upon receipt of the collar, be sure to give it a 4-hour initial charge 
before the first use.

The indicator light on the Transmitter or Receiver will not come on. 
The indicator light on the Transmitter or Receiver comes on 
momentarily when any of the Mode Buttons is pushed.

16

17

Normal operation 

- Good battery

Charging

 Complete

Receiver Collar Function

Green LED Response

Flashes once

fl

ash every 5 seconds

On length of 

TONE

 button press

Flashes 

once

 

every second 

within

 

1

seconds

Flashes 

rapidly

 

for

 

five

 

times

On length of the charger connected

Power on

Training tone

In p

airing 

position

Pairing

 Complete

Receiver Indicator Light – Function and Response 

Summary of Contents for p-collar 310
















Reviews: