34 | P a g e
PATON
®
PSI PRO 315 A 400 V DC MIG/MAG TIG/MMA
Term of the main guarantees for welding inverter professional series PSI 315 PRO is
3 years. The basic warranty period is calculated from the date of sale to the end customer of the
inverter equipment.
During the main warranty period, the seller covenants charge the inverter equipment of
PATON
®
to
the owner:
1.
To diagnose and determine the cause of failure,
2.
To ensure the necessary repairs to units and elements,
3.
To carry out work on the replacement of defective components and units,
4.
To test the repaired equipment.
The basic warranty obligations do not include devices:
1.
Mechanical damage affected the availability of the device (deformation body parts and in
consequence of a fall or drop heavy objects on the equipment, loss of pins and connectors)
2.
Traces of corrosion that caused the fault condition,
3.
The failed because of the impact on its power and electronic elements abundant moisture,
4.
The failed due to the accumulation of conductive dust inside (coal dust, metal chips, etc.),
5.
In case of attempting to repair its nodes and / or replacement of electronic components,
Once on six months,
clean internal parts and components with compressed air when removing the
protective box in order to avoid exit of the unit system on the equipment. Cleaning should be carried
out carefully, keeping the compressor hose at a sufficient distance to avoid damage to the soldering of
electronic components and mechanical parts.
Also, the basic warranty does not apply
to defective external elements of equipment that exposed to
physical contact and the attendant / supplies. Claims on the fallowing items are accepted no later than
two weeks from the date of sale:
1.
Pins on and off,
2.
Knobs of the welding parameters,
3.
Cabling connectors and sleeves,
4.
Connectors management
5.
The power cable and power plug,
6.
Carrying handle, shoulder strap, carrying case,
7.
Electrode holder, earth clamp, burners, bayonet connectors, welding cable, hose.
The Seller reserves the right to refuse
to provide warranty repairs, or set as the date for the
commencement of the warranty a month and year of the machine (set by serial number):
1.
In case of loss of the passport holder,
2.
In the absence of a correct or even any passport fill the seller in the sale of the machine,
3.
In the absence of a serial number on the machine manufacturer reserves the full right to
refuse warranty service.
ATTENTION!
The warranty period is extended for the period of the
warranty service machine to the service center.
For
PSI 315 PRO
series welding inverters - 400 V
- 3 years basic warranty.
It is a mandatory condition that the service is carried out within the required
time limits in an authorised service centre. The initial maintenance should take
place 24 months after the date of sale.