PATON
VDI-SERIES PRO
DC MMA/TIG/MIG/MAG
-33-
ELECTRIC POWER SOURCES:
It is forbidden to work with
damaged welding wires or on wet substrates. Welding cables
should be strong, undamaged and insulated. Weakened
connections and damaged cable must be replaced immediately. Do
not carry the device by pulling it by the power cord or wires. Do
not perform any maintenance work on the unit.
Removing the outside cover of the device while it is connected
to the network and using the device with the lid removed is
forbidden.
NOISE ASSOCIATED WITH WELDING CAN BE
HARMFUL:
The welding arc formed during welding can emit
sounds higher than 85dB for - 8 hours of working time. Welders
operating the equipment are obliged to wear equivalent hearing
protectors during work in accordance with the Regulation of the
Minister of Labor and Social Policy of 6 June 2014r. - Dz. U.
2014 pos. 817. Pursuant to the Ordinance of the Minister of
Health on Social Welfare dated 09.07.1996 OJ No. 68 pos. 194 -
The employer is required to carry out research and measurement
of factors harmful to health.
CONFORMITY DECISION:
This device accomplish the
recommendation of the European CE Committee.
SAFETY MARK:
This device is suitable for mains power, for
welding work in an environment of higher standard of electric
shock. It is recommended that the power line be provided with a
separate protection against the shock absorber.
15. WARRANTY
The Pilot Plant of Welding Equipment of the E.O Paton Electric Welding Institute
guarantees the correct operation of the power supply if the costumers provided service
conditions, storage and transportation.
ATTENTION!!!
Warranty commitments are cancelled in case of
mechanical damage.
Term of the main guarantees for welding inverter series PRO is 5 years. The basic
warranty period is calculated from the date of sale to the end customer of the
inverter equipment.
