PATON
VDI-SERIES PRO
DC MMA/TIG/MIG/MAG
-32-
ARC RAYS CAN BURN:
It is not allowed to directly observe the
welding arc with uncovered eyes.
Arc and splinters may cause skin burns or flames, so always wear
a protective mask fitted with a darkened filter (glasses should be
equipped with glass filter grade DIN 9 10)
Any unauthorized persons near your site should protect your eyes
with special protective goggles or with non-flammable, radiation-
absorbing screens.
VAPOUR AND GASES MAY BE DANGEROUS:
The resulting
smoke and harmful gases should be removed from the work area
by means of specialized equipment, do not cover the ventilation
openings. Welding should be carried out in well ventilated areas
and welding vapors are harmful to health - especially when
welding materials such as lead, mercury, cadmium, zinc,
beryllium, galvanized or stainless steel. Ensure sufficient fresh air
flow in the room. Do not allow solvent vapors to enter the welding
arc area.
ELECTROMAGNETIC POLE MAY BE DANGEROUS:
By inducing a high voltage current, the electromagnetic field
flowing through the welding wires may have a negative effect on
the performance of electrical devices such as the cardio-
stimulator. Persons wearing such equipment should consult a
physician before entering the area where welding work is
performed. Welding hoses should be arranged in parallel, as close
as possible to each other.
ELECTRICAL SPARK MAY CAUSE FIRE OR EXPLOSIVES:
Flammable items should be removed from the workplace. Do not
perform welding work on containers that contain gases, fuels, oil
products or other flammable materials. There is a risk of explosion
of residue of these products. When performing welding work in
potentially explosive or fire hazards, special rules must be
observed that comply with national and international standards.
Firefighting equipment such as: (powder or snow fire
extinguishers, fire blankets) should be located near the
workstation in a visible, readily accessible place.
BOTTLE CAN EXPLODE:
Use only approved bottles and
properly functioning regulators. The cylinder should be
transported and positioned vertically. Protect the cylinder from
heat, overturning and mechanical damage.
WELDED MATERIALS MAY BURN:
In no case should you
touch the welded parts with bare hands. Always wear protective
gloves when operating the machine. The arc and splinters that
develop during the burn can cause skin burns. Wear protective
gloves and pliers when touching or moving the welded item.
