Paton MINI, User Manual, Page: 47 / 55

- 47 -
PATON ECO DC MMA
The machine must be placed so as to ensure free inlet and outlet of cooling air
through vent holes on the front and the rear panels. Take care that metal dust
(for example, during emery grinding) does drawn directly into the machine by the
cooling fan.
2.3 POWER CONNECTION
The welding machine of series design is rated for mains voltage of 220 V ( ‐ 23%
+18%).
ATTENTION: All manufacturer's warranty liabilities become void if the machine
is used with supply voltage exceeding 270 V!
Mains connector, cross ‐ sections of power supply cables and supply ‐ line fuses
must be selected on the basis of technical specifications of the machine.
2.4 MAINS PLUG CONNECTION
ATTENTION: Mains plug shall correspond to supply voltage and current
consumption of the welding machine (see technical data). In accordance with
safety practices, use receptacles with guaranteed earthing!!!
3. WELDING WITH STICK ELECTRODES (MMA)
-
insert the electrode cable into the source socket А "+";
-
insert the "earth" cable into the source socket B " ‐ ";
-
connect the "earth" cable to the work piece;
-
connect the mains plug to the supply mains;
-
set power switch 3 on the rear panel to position "I";
Fig. 2. Machine connection diagram for welding with stick electrodes