Paton MINI, User Manual, Page: 42 / 55

PATON ECO DC MMA
- 42 -
Connection to power mains / power board (at 25ºС ):
ATTENTION: Make provision for cables routed in the walls and other
extension cords!
Electrode used Set current value
Power cable cross‐
section, sq. mm
Maximum cable
length, m
Ø 2 mm 80 A at most
1.0 120
1.5 180
2.0 240
2.5 300
4.0 480
6.0 720
Ø 3 mm 120 A at most
1.5 120
2.0 160
2.5 200
4.0 320
6.0 480
Ø 4 mm 160 A at most
2.0 120
2.5 150
4.0 240
6.0 360
Ø 5 mm, low‐melting 200 A at most
2.5 120
4.0 190
6.0 290
Ø 5 mm,
high‐melting
250 A at most
2.5 100
4.0 150
6.0 230
ATTENTION: Supply button on the rear panel of the machine is not a power button,
so it does not provide complete de ‐ energization of internal electronic parts, when the
machine is switched off. Therefore, in accordance with safety rules, disconnect the
plug from the mains after completion of welding.