- 13 -
PATON
Feeder
DC MIG/MAG
HAZARD OF MAINS AND WELDING CURRENTS
-
Electrical shock can be fatal;
-
Welding cable must be strong, undamaged and insulated. Loose connections and
damaged cables must be replaced immediately. All mains and welding machine
cables should be checked regularly for correct insulation by an electrician;
-
The outer cover of the machine must not be removed during operation.
INFORMAL SAFETY PRECAUTIONS
-
In addition to the instructions, comply with the general and local safety and
environmental regulations in force;
-
If possible, do not place the machine directly on the conductive surface of the floor
or the work table and use insulating pads.
COMMON PRECAUTIONS
Check the unit for external damage at least once a week.
11. WARRANTY OBLIGATIONS
PATON INTERNATIONAL warrants that the wire feeder will operate properly if the user
follows the operating, storage and transportation conditions.
WARNING!
There is no free warranty service if the welding machine is mechanically
damaged!
Machine model
Warranty period
Feeder-15-2
3 years
Feeder-15-4
The main warranty period is calculated from the date of sale of the inverter equipment to the
end customer.
During the main warranty period, the seller undertakes, at no charge to the owner of the
PATON inverter equipment:
- To make a diagnostic and identify the cause of the breakdown,
- To provide the units and elements necessary for repair,
- To replace defective components and units,
- To test the repaired equipment.
The main warranty does not cover the equipment:
- With mechanical damage that affects the performance of the equipment (deformation of
the housing and parts as a result of falling from a height or falling of heavy objects on the
equipment, falling out of the buttons and connectors),
