PATIO HQ NC4314R-42, Manual

Page: 13 / 25

FIRE TABLE ASSEMBLY GUIDE CONTINUED
Fig. 18 Attach ½” flex connector to ½”
flared fitting on bottom of pan. Secure
and gently lower pan into place.
Fig. 17 Attach end of flex connector
to manual gas valve.
Fig. 16 Attach pressure regulator
hose to manual gas valve.
Fig. 19 Remove tank access door
with handle (Pull out, lift up).
Fig. 20 Place LP tank in cradle. Lift
cradle slowly until tank is upright.
Fig. 21 Attach pressure regulator to
LP gas tank.
Fig. 22 Ensure all connections are
tight and leak free.
Fig 23 Install tank access door
(Drop down, push in).
THIS IS A QUICK SET-UP GUIDE ONLY. ENSURE ALL GAS FITTINGS ARE PROPERLY LEAK TESTED
Fig. 24 Add fire glass to burner
providing adequate coverage*.
*
Three (3) bags of fire glass are recommended for adequate coverage of the burner pan.