Pathway Connectivity
9
QUATTRO Manual
November 2018
Setting Gateway Properties
With the default display showing, press the encoder knob. The Node Configuration
menu will be shown.
The current menu choice will be highlighted in black. Rotate the knob to scroll
through the list. Push the knob to select the highlighted menu option. Scroll to the
bottom of the list and select “<Back>” to return to the previous menu level. The
following are the Node Configuration menu options.
Node Configuration
Network Setup
Device Info / Status
Protocol Support
Utilities
<Back>
Network Setup
Property
Explanation
Available Settings
IP Address
Set IP address for gateway
Select, then turn knob to set
each octet. Push to accept.
Subnet Mask
Set subnet mask for gateway
Select, then turn knob to set
each octet. Push to accept.
Default Gateway
Set default gateway
(Not typically required)
Select, then turn knob to set
each octet. Push to accept.
Node Configuration
Network Setup
Device Info / Status
