8
Things you need to know before
you start training your dog
Settings on the DOG-e-walk
Do you know how sensitive your
dog is? Always begin the training on
Signal Level 1, and only change the
level the next time you go for a walk.
This way you can find out which
signal level your dog is most likely to
react to.
Level 1 – very sensitive dogs
Level 2 – sensitive dogs
Level 3 – less sensitive dogs
Level 4 – least-sensitive dogs
Remote control volume function (+/-)
This enables you to increase or
decrease the volume of the signal
level that you have chosen. This
function is only meant for training
while using the DOG-e-walk as a
remote control, and
not
during a
walk, when the DOG-e-walk becomes
a part of the leash. The signal
automatically turns itself off after
three seconds. If your dog reacts
immediately, then you can decrease
the volume.
Please note:
The speaker gives a
direct signal to your dog’s ear. This is
because the signal doesn’t spread. It
stays concentrated so that other dogs
nearby don’t hear it. If you don’t
direct the signal at your dog, it won’t
be able to hear it.
www.RollingTStores.com/dog-accessories/patento-dog-e-walk-all-in-one-trainer/
