Patek Philippe 5216, Manual

Page: 4 / 19

Indications, functions, and settings
DISPLAYS AND FUNCTIONS
1 YEAR (IV = LEAP YEAR)
2 MONTH
3 MOON PHASE
4 RETROGRADE DATE HAND
5 DAY OF WEEK
6 WINDING POSITION
7 HANDSETTING POSITION
8 SLIDE FOR ACTUATING THE STRIKING MECHANISM
SETTINGS
A-
PUSH PIECES FOR CALENDAR CORRECTIONS: DAY OF
WEEK (5), DATE (4), MONTH (2), YEAR (1)
B-
PUSH PIECES FOR MONTH (2) AND YEAR (1)
CORRECTIONS
C-
PUSH PIECE FOR MOON PHASE CORRECTIONS (3)
D-
PUSH PIECE FOR DAY OF WEEK CORRECTIONS (5)
NOTE ON CORRECTING PERPETUAL CALENDAR DISPLAYS (PUSH PIECE A) AND MOON PHASE DISPLAY (PUSH PIECE C):
• TO PREVENT DAMAGE TO YOUR WATCH, PLEASE PERFORM ALL SETTINGS AND CORRECTIONS WITH THE CORRECTION
STYLUS THAT WAS SUPPLIED WITH YOUR WATCH. ANY OTHER TOOL COULD DAMAGE YOUR WATCH.
• DATE AND MOON PHASE CORRECTIONS MUST BE MADE AT 7 AM. THIS IS THE ONLY WAY TO ASSURE THAT THE DATE
CHANGE MECHANISMS ARE NOT ENGAGED AND CANNOT BE DAMAGED.
• THE SETTING SEQUENCE DESCRIBED BELOW MUST BE OBSERVED.
Settings
PREPARATIONS PRIOR TO SETTING
• Before performing any corrections or settings, always
wind the watch (10 turns of the winding crown)
• Pull the crown out (7)
• Advance the hands clockwise until the date hand (4)
advances by one day
• Set the hands to 7 am
• Push the winding crown home again (6)
• Actuate push piece ( A ) until the date hand (4) points
to the 1
7
6
A
4
8
A
1 5 2 6 7
B C
4 3
D