Configuration Setup
© PAT Revision E // SB // 09/03/02
190137_E
11
4 CONFIGURATION SETUP
The LMI setup procedure allows the operator to input the crane configuration using
interactive displays. The operator must complete the setup procedure for the Load
Moment Indicator system if the system has been turned off for more than two hours or the
crane operation configuration has been changed.
4.1 LMI Setup Procedure
...starts:
automatically
, if the system was
turned off for more than two
hours.
manually
at each modification of
the crane configuration by
pressing key (9) "SEL"
...is operated:
by answering the different
questions using functional keys
F1...F4 matching the actual
configuration of the crane.
...is cancelled:
any time by pressing again key
(9) "SEL". The system, however,
is only ready for operation, if the
procedure has been completed
and the inputs have been
confirmed.
If the system is turned off less than 2 hours (during short breaks), all adjustments remain
stored. When turning the system on again, these adjustments can be acknowledged by
merely pressing the “OK” function key
if
the crane configuration has not been modified.
Note during low temperatures the LC display will not show the graphics, or become
operational, until the console heater has warmed the electronics.
For extended travel on tire without load, Press the “SEL” button to silence the alarm.
NOTE: When the “SEL” button is pressed and no operating configuration is selected, the
boom down and tele out functions are locked out because the LMI is not in operation.