Pass INT-25 User Manual Download Page 7

6

7

Warranty:

Please check with the factory authorized distributor in the country where you are purchasing 
this product for specific warranty information.

All Pass Laboratories products purchased new from an authorized Pass Laboratories dealer in 
North America are covered by a transferable, limited 3-year warranty. This warranty includes 
all parts and labor charges incurred at the factory or factory specified repair facility, exclusive 
of  any subsequent or consequential damages. Damage due to physical abuse is specifically 
excluded under this warranty.

For this warranty to apply the customer is responsible for returning the product unmodified to 
the factory within the specified warranty period.  The customer assumes all responsibility for 
shipping  and  insurance  to  and  from  the  factory  or  a  factory  specified  repair  facility.  The 
conditions and stipulations of  this Pass Laboratories warranty only applies to units originally 
sold new through an authorized dealer.  Warranty on factory repair is 60 days and covers only 
the scope of  the original repair.

Non-North  America  customers  should  consult  with  their  original  Pass  Labs  dealer  or 
distributor for warranty repair instruction prior to contacting the factory or shipping product 
to the factory for repair. 

Non-North American product must be returned to the country of  origin for warranty service.  
Foreign distributors are only required to offer warranty service on Pass Laboratories product 
that they have imported, verifiable by serial number.

Please  note:  Conditions  of   warranty  service  and  customer  rights  for  product  purchased 
outside the United States may vary depending upon the distributor and local laws. Please check 
with your local distributor for specific rights and details.

Any  modifications  to  Pass  Laboratories  products  that  have  not  received  written  factory 
approval nullify all claims and void all provisions of  the warranty and liability by the maker or 
authorized distributor. Should a modified product be returned to the factory for repair the 
owner will be required to pay all necessary charges for the repair in addition to those charges 
required to return the product to it's original configuration.

In the case of  safety issues, no product shall be returned to the customer without those safety 
issues being corrected to the most recent accepted standards. 

Removal or alteration of  original Pass Labs serial numbers voids the factory warranty. Product 
with altered or missing serial numbers will be suspect as counterfeit or stolen product.

Pass Laboratories will not repair or in any way indemnify any counterfeit or cloned product.

Pass  Laboratories  does  not  offer  products  in  voltages  intended  for  international  markets 
either  to  authorized  Pass  Labs  dealers  or  to  third  parties  located  in  the  United  States  or 
Canada.

Pass  Laboratories,  13395  New  Airport  Rd.,  Suite  G.,  Auburn,  CA  95602

Phone:  530.878.5350,  Fax:  530.878.5358,  Web:  www.passlabs.com

“Pass”, “

PASS

”, “Pass Labs”, “Pass Laboratories”, Supersymmetery”, “Aleph”, and “Zen” 

and are all registered trademarks of  Pass Laboratories, Inc., and all rights thereto are 
protected by law.

6.48

17.00

5.

10

6.

04

11.48

15.70

9.48

14.48

17.86

INT-25

Summary of Contents for INT-25








Reviews: