XP 20 Owners Manual Rev 0.4
6
Reappear at Any Random Place within the Universe, Including Your Neighbor's
Domicile.
The Manufacturer Will Not Be Responsible for Any Damages, Inconvenience or Mental
Anguish That May Result.
There is a much higher probability that when you first plug your new pre-amps power
supply into the wall and listen to your favorite selections that you will not be
experiencing the full measure of performance this product is capable of. These are high
bias Class A topology circuits and their performance is largely temperature dependent.
We expect these circuits to heat up slowly through normal operation, do not attempt to
augment that heating by any artificial means. Temperature and performance will slowly
stabalize over the first 24 - 48 hours of operation and thereafter be at their sonic best.
Be aware however that if you unplug or otherwise remove power from the unit that the
warm up period starts afresh.
Please give this product at least 24 hours initial warm
up time before attempting any critical listening.
A typical current draw for this product is 25 watts or less; the XP-20’s are designed to
be powered up 100% of the time.
SET-UP AND OPERATION
So much for the philosophy, physics and advantages, lets play music.
Please read and understand the operational instructions and safety issues associated
with this product. We go through great effort to make a soundly engineered, and
supurbly performing rugged product of lasting duribility. We understand that things
infrequently go wrong, if you have any questions or problems please contact either your
dealer or the factory, we are here to support the product and you, the user.
As with all audio electronics the power cable should be the last thing attached and the
first one removed any time you hook up or remove equipment from the signal chain.
