PAGE 6
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
Lektron Series
®
PROFESSIONAL AUDIO & SOUND
®
INSTALLATION AND OPERATION
MIC 1
MIC 2
AUX
VOLUME
TONE
TAPE
OUT
EXTERNAL
SPEAKER
CAUTION: TO REDUCE THE RISK OF FIRE,
REPLACE ONLY WITH SAME TYPE FUSE.
ATTENTION: AFIN DE REDUIR LE RISQUE
D'INCENDIE, REMPLACER SEUL PAR UN FUSIBLE
DE MEME TYPE.
DC FUSE
3 A - 250 V
AC FUSE
1A - 250 V
POWER
AC LINE INPUT
MIC
AUX
IN
OUT
SPEECH FILTER
SoundLectern
Lectern Amplifier Mod.
LA 25V
SUPPLY VOLTAGE AC:
117V 60 HZ
DC:
12V DC INTERNAL
BATTERY
POWER CONSUMPTION AC:
90 VA
DC:
40 W
PASO SOUND PRODUCTS, INC. SOUTH CAROLINA - USA
CAUTION: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EX-
POSE THIS APPLIANCE TO RAIN OR MOISTURE.
DO NOT REMOVE COVER. THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ATTENTION: POUR REDUIR LES RISQUES
NE PAS EXPOSER A LA PLUIE OU L' HUMIDITE.
NE PAS ENLEVER LE COUVERCLE. AUCUN REGLAGE A L' INTERIEUR. POUR
REPARATION CONSULTER UNE PERSONNE
QUALIFIEE.
D' INCENDIE OU DE CHOC
ELECTRIQUE,
PROFESSIONAL AUDIO & SOUND
®
117V 60 Hz
INPUTS
MIC 1- Microphone Input 1. This is the Sound
Lectern main microphone input. Use a low
impedance Unidirectional Dynamic Microphone.
MIC 2 - Microphone Input 2. Use a low imped-
ance Dynamic Microphone. This input is con-
nected in parallel with Microphone Input 1.
AUX - Auxiliary or Line Input. Accepts high level
program from tape, tuner or preamplifier mixer.
INPUT CONTROLS
MIC/AUX - Microphone - Auxiliary Input Selector
Switch. Selects either the microphone or the
auxiliary input.
SPEECH FILTER - Speech Filter Equalizer.
When on, reduces interference from feedback
and improves intelligibility.
VOLUME - Volume Control. Adjusts volume of
microphone inputs 1, 2 and auxiliary input.
TONE - Tone Control. Adjusts the tonal balance.
OUTPUTS
TAPE OUT - Tape Output. Use this output to
record from the lectern or to drive an external
sound system.
EXTERNAL SPEAKER - Output for external
speaker.
POWER
DC FUSE - Battery DC fuse. Use type 3AG - 3A.
AC FUSE - AC line fuse. Use type 3AG - 1A.
CAUTION:
Disconnect power cord before
replacing fuses.
POWER - On-Off power switch.
AC LINE INPUT - Connect power cord provided
to this input.
AMPLIFIER PANEL CONTROLS
