PAGE 5
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
Soundcaster
®
PROFESSIONAL AUDIO & SOUND
®
OPERATION PROCEDURES
Audio Link Master / Slave Operation
In order to operate Audio Link, you must have a unit
that operates as a MASTER (only one unit is allowed
to act as MASTER and the other(s) MUST operate as
SLAVE(s). A MASTER unit is capable of connecting up
to 20 SLAVE units via daisy chain method.
To operate Audio Link, connect the Output jack of the
MASTER to the Audio Link IN jack of the 1st SLAVE
unit. The Output jack of this SLAVE should be con-
nected to the Input jack of the 2nd SLAVE unit. Similar
connection shall continue as such for the following
SLAVE units.
Volume Control for SLAVE
When used on the SLAVE unit, it only controls that
particular units volume.
Maximum number of SLAVE units to be connected
with a MASTER is 20.
Voice Priority Operation
Voice Priority operation will only be enabled when
there is a source input into Line in.
When the Voice Priority switch is put to the ON posi-
tion, the attenuating function will be activated. While
the music is playing, a voice input from either a Wired
or Wireless Microphone will temporary turn down the
volume of the background music. Background music
will return to its original setting when a signal from the
microphone is no longer sensed. Voice priority is best
operated using microphones with a push to talk or on
/ off switch.
Battery Charging
Internally, the WPSS100 contains two 12V / 4.5AH
maintenance-free lead acid batteries, which have no
memory effect.
When the battery is weak, the power indicator will be
RED when the main power switch is on.
To charge the battery, simply plug in the AC power
supply, the charging process will start automatically.
While charging, the charging indicator will be flashing.
When battery is fully charged, the charging indicator
will stay GREEN.
Speaker Out ( unswitched )
When an external speaker is connected to this output,
both the internal speaker of WPSS 100 and the exter-
nal speaker will have sound.
Speaker Out ( switched )
When an external speaker is connected to this output,
the internal speaker of WPSS100 will be muted and
only the external speaker will have sound.
Trolley Release Button
This button serves to release the locking mechanism
of the trolley. To pull out the first stage of the handle,
one does not have to press the button to release it. To
pull the second and third stages of the handle, press
the release button to unlock the mechanism.
To put back the handle, press the release button to
unlock the mechanism and return the handle to its
original position.
All Soundcaster enclosures have identical mechanical parts as follows :1-Antenna slots (future expansion) 2-Cabinet handle 3-Trolley release but-
ton 4-Three stage trolley 5-Wheels 6-Heavy duty stand bracket
NOTE: Please be advised that the trolley and wheels are meant for moving around on smooth surfaces and short distances only. It is NOT meant
or built for heavy duty long distance transportation on rough surfaces. DO NOT use the trolley as a handle for lifting or going up and down stairs.
For these purposes use the fixed cabinet handle ( 2 ).
MECHANICAL PARTS
1
2
3
4
5
6
