Clavadora de Rollo de clavos
Paso 1:
Tome firmemente la clavadora por el
mango con una mano y con la otra abra la pinza
de la cubierta del cargador. Despoés abra bien la
puerta del cargador.
Paso 2:
Si fuera necesario, adapte la bandeja del
cargador a la longitud de los clavos, sacándola
un poquito para poder levantarla o bajarla a la
posicíon deseada.
Paso 3:
Quite el retén de un rollo de clavos y coloque el
rollo en el cargador, de modo que la punta de los clavos se
apoye en la bandeja, teniendo unos 10 cm de clavos desen-
rollados.
Paso 4:
Haga deslizar la tira de clavos desenrollada a lo
largo de la parte superior del alimentador: ponga el primer
clavo entre el gancho del alimentador y localizador.
Paso 5:
Cierre cuidadosamente la puerta del cargador y
póngale el seguro.
Paso 6:
Empuje hacia adelante el primer clavo hasta la
posición de impulso, haciendo adelantar la herramienta un
ciclo contra la superficie de trabajo. La clavadora está ahora
lista para usarse.
PELIGRO
Tenga cuidado de no sacar demasiado la
bandeja, porque se podría desenganchar y
estirar el resorte.
COMO CARGAR LA
HERRAMIENTA
Summary of Contents for RHP-350
