INTRODUCTION
The PASLODE LL350S strip nailer is a quality-built tool designed for use in DIY and
residential framing applications. This tool will deliver efficient, dependable performance when
used according to the manufacturer’s guidelines. Please study this manual including the safety
used according to the manufacturer s guidelines. Please study this manual including the safety
instructions to fully understand the operation of this tool.
DO NOT ATTEMPT TO OPERATE THE TOOL UNTIL YOU READ AND UNDERSTAND ALL
SAFETY PRECAUTIONS AND MANUAL INSTUCTIONS.
TOOL AND FASTENER SPECIFICATIONS ......................................................... 3
SAFETY INSTRUCTIONS ................................................................................... 4
TOOL OPERATION ............................................................................................. 5
MAINTENANCE.................................................................................................... 6
TROUBLESHOOTING
................................................................................
7
EXPLODED VIEW AND SPARE PARTS LIST ..................................................... 8
ACCESSORIES ..................................................................................................
9
Paslode warrants that newly purchased power fas-
tening tools, parts and accessories will be free from
defects in material and workmanship (excluding wear
parts) for the period shown below, after the date of
delivery to the original user
period. Any replacement part or accessories provided
in accordance with this warranty will carry a warranty
for the balance of the period of warranty applicable to
the part it replaces.
TOOL WARRANTY AND LIMITATIONS
delivery to the original user.
90-DAY LIMITED WARRANTY
A 90-day warranty will apply to all parts, except those
which are specifically covered by an extended
warranty.
EXTENDED LIMITED WARRANTY FOR ON SITE
CONSTRUCTION APPLICATIONS
This warranty is void as to any tool which has been
subjected to misuse, abuse, accidental or intentional
damage, used with fasteners not meeting Paslode
specification, size or quality, improperly maintained,
repaired with other than genuine Paslode
replacement parts, damaged in transit or handling, or
which, in Paslode’s opinion, has been altered or
repaired in a way that affects or detracts from the
f
f th t
l
CONSTRUCTION APPLICATIONS
A one year warranty will apply to all housing and cap
assembly casings.
NORMAL WEARING PARTS
The following parts are considered normal wearing
parts and are not under warranty:
•
Bumper
performance of the tool.
PASLODE MAKES NO WARRANTY, EXPRESSED
OR IMPLIED, RELATING TO MERCHANTABILITY,
FITNESS, OR OTHERWISE, EXCEPT AS STATED
ABOVE, and Paslode’s liability AS STATED ABOVE
AND AS ASSUMED ABOVE is in lieu of all other
warranties arising out of, or in connection with, the
use and performance of the tool, except to the extent
p
•
Drive
Blades
•
O-Rings
&
Gaskets
•
Piston
Rings
WARRANTY STATEMENT
Paslode’s sole liability hereunder will be to replace
any part of accessory which proves to be defective
within the specific time
p
,
p
otherwise provided for by applicable law.
PASLODE SHALL IN NO EVENT BE LIABLE FOR
ANY DIRECT, INDIRECT, OR CONDEQUENTIAL
DAMAGES WHICH MAY ARISE FROM LOSS OF
ANTICIPATED PROFITS OR PRODUCTION,
SPOILAGE OF MATERIALS, INCREASED COST OF
OPERATION, OR OTHERWISE.
p
Paslode reserves the right to change specifications,
equipment, or designs at any time without notice and without
incurring obligation.
2
