ALWAYS REMOVE
BATTERY, FUEL CELL
AND FASTENERS
WHEN SERVICING
OR CLEARING A JAM.
11 PPN-MASTER IM40 MANUAL
PPN-MASTER IM40 MANUAL 12
TOOL MAINTENANCE
CLEARING A FASTENER JAM
Remove Nut from rear of
magazine
With driver blade clear,
operator is free to remove
jammed or bent nail
Reassemble tool,
attached magazine to
nose, replace cap screws
and Nylock nut.
Tool is ready to use.
Remove Battery, Fuel cell
and nails
Remove the magazine
assembly to expose the
back of the nose slot (Be
careful the nail follower
does not come out of the
magazine channel)
Remove 2 cap screws
located on side of
Magazine securing
magazine to the nose
Push or punch the driver
blade back to top rest
position, using a long
punch (if needed)
1
2
3
4
5
6
CLEANING THE AIR FILTER
Tap filter gently against
timber to remove dust
Use a flat bladed screw
driver to remove cap
Cleaner/Degreaser or soap
and water restores the filter
Filter will look like new
1
2
3
4
7
Please scan QR code for tool specific
maintenance instructions
TROUBLESHOOTING
FIRING THE TOOL
Tool Working Correctly
PROBLEM:
No fan and
does not fire
SOLUTION:
• Check for flat battery
• Remove and re-change battery to reset tool
BANG
BZZZZZ
BZZZZZ
BANG!
BANG
PROBLEM:
Fan runs but tool
does not fire
SOLUTION:
• Check for empty fuel cell, flat battery, clogged filter or dirty spark plug
• Check driver blade returned to top of cylinder
• Clean and oil tool
BZZZZZ
BZZZZZ
PROBLEM:
Fan runs, tool fires,
no nail fed.
SOLUTION:
• Check for jammed nail
• Check for collation tape or nail jam, or any foreign body in magazine
• Clean out any oil or material - do not oil magazine
BANG!
ALWAYS REMOVE
BATTERY, FUEL CELL
AND FASTENERS
WHEN SERVICING
OR CLEARING A JAM.