3
Description
The Paslode Cordless Finish
nailer is a self-contained, fully
portable nailer that uses liquid hydrocarbon fuel to power a
unique linear drive internal combustion motor.
In order for you to fully understand the information contained
in this manual, you need a basic understanding of the
Paslode Cordless Finish nailer. As you can see in the
illustration below, the Paslode Cordless Finish nailer is
made up of three separable assemblies: handle ,motor and
magazine.
As you examine the Paslode Cordless Finish nailer, become
familiar with the three major assemblies and the various
components located in each of them.
The Handle Assembly contains the fuel cell, the battery
indicator light, and the trigger.
The Motor Assembly contains the cover and filter, the
motor housing, the nose, and the work contacting element.
The Rail Assembly contains the components to load and
control the specfic fastener for the Cordless Finish nailer.
Specifications
Dimensions:
Weight 5 lbs 1oz.
Height 12-1/2 nches
Length 11-3/4 inches
Cycle Rate:
Intermittent Operation – 2 to 3 nails
per second
Continuous Operation – 500 nails
per hour
NOTE: Exceeding these rates could cause tool to overheat,
resulting in loss of performance or damage to tool
components.
By using the Cordless Finsih nailer at its recommended
cycle rate, you will be able to drive several thousand nails in
a typical workday.
Fasteners:
16 gauge, F-16 Series, Chisel Point
Magazine Capacity: 2 nail strips, or 100 fasteners
Battery :
6 volts DC - Provides enough energy to
drive approximately 4000 fasteners on a full
charge.
Fuel Cell:
Liquid hydrocarbon - Provides enough fuel
to drive approximately 2500 fasteners.
An Overview of the Paslode Cordless Finish Nailer
belt hook
Rail Assembly
fuel cell compartment
motor housing
cap
cover & filter
tip
Handle Assembly
trigger
Motor Assembly
battery compartment
(opposite side)
battery indicator light
(opposite side)
follower
