Release date: 24.07.18
rev 1.0 18
5 / 5
POWER THE PARKING SENSOR CONTROL UNIT WITH THE PINK CABLE OF MODULES, FOLLOWING THE PDC INSTRUCTION MANUAL.
THE SYSTEM WORKS WITH THE IGNITION ON.
THE SYSTEM IS ACTIVATED BY INSERTING THE REVERSE AND DEACTIVATED BY REMOVING THE REVERSE.
IF YOU WANT TO INSTALL THE MODULE ON A NEW CAR, IT IS NECESSARY TO EXECUTE THE MODULE RESET.
RESET:
1.
WITH THE UNIT POWERED, PRESS AND HOLD THE MODULE BUTTON UNTIL THE LED SWITCHES OFF.
2.
WITH THE LED OFF, RELEASE THE BUTTON: THE RESET IS DONE.
ATTENTION
TROUBLESHOOTING
Parking Sensor UNIT
PROBLEM
CAUSE
SOLUTION
The system doesn’t work when the back gear is
inserted.
Wrong connecBon of the power wires
Power the parking sensors through the Parkview
Wrong connecBon of the plugs
Verify the connecBon of the connectors of the
parking system
The system detects always the obstacle
The system detects the ground
Verify that the sensors caps are installed horizon-
tally respect the ground.
Caps sensors are varnished
incorrectly
Verify that the caps varnish layer is not too thick.
In this case the sensors can detect it as an obsta-
cle.
The test is made in closed space
Please make the test of the system in an open
space and not into a close room.
The sound of the buzzer is not available
Wrong connecBons of the caps sensors
Please control the caps sensors connecBon
PARKWIEW
PROBLEM
CAUSE
SOLUTION
The unit doesn’t manage any funcBon and the
LED is OFF.
Wrong connecBon of the power wires
Verify the power connecBons
The unit is right connected but it doesn’t manage
any funcBon and the LED is OFF.
Wrong connecBon of the CANBUS wires
Verify the CANBUS connecBons
The unit is right connected and the LED blinks
RED quickly.
CANBUS protocol unknown or upgraded by the car
manufacturer
The unit is not able to synchronize the CANBUS
protocol; please contact the distributor
The unit is right connected and the LED blinks
RED irregularly.
Wrong connecBon of the CANBUS wires
Verify the CANBUS connecBons
The unit is right connected and the LED switches
on RED.
CANBUS protocol unknown or upgraded by the car
manufacturer
The unit is not able to synchronize the CANBUS
protocol; please contact the distributor
PARKVIEW CF00062OFR51-ORA51
Module to visualize the A ermarket Parking Sensors
FRONT REAR COBRA PS0158
INSTALLATION MANUAL
45’
Technical features
POWER
10/16 VDC
SLEEP MODE ABSORPTION
<1 mA
WORKING MODE ABSORPTION
1 A
WARRANCY
THIS PRODUCT IS GUARANTEED FOR 2 YEARS FOR ANY MANUFACTURING DEFECTS.
THE FISCAL DOCUMENT SERVES AS THE GUARANTEE VALIDITY
The informa on in this guide are purely for informa on purposes, therefore, are subject to change without no ce. At the me of publica on the informa on is
correct and reliable. However Paser can not be held responsible for any consequences resul ng from errors or omissions in this manual. Paser reserves the
right to improve / change the product or manual without obliga on to no fy users.
