4
Description
The Handle Assembly contains the
fuel
cartridge, indicator
light, and the trigger.
The Motor Assembly contains the cover and filter, the motor
housing, the nose, and the Nail Hole Locating Probe.
The Magazine Assembly
d
a
o
l
o
t
s
t
n
e
n
o
p
m
o
c
e
h
t
s
n
i
a
t
n
o
c
and control the fastener and the battery for the Cordless
Nailer.
Specifications
Dimensions: Weight-
with battery
6.7 lbs
Height
13.6 inches
Length
12.2 inches
Width
5.4 inches
Magazine
29 Nails
(use Paslode 1-1/2" Positive Placement
®
Nails only)
Cycle Rate: Intermittent Operation – 2-3 nails per second
NOTE: Exceeding these cycle rates could cause the tool
to overheat, resulting in loss of performance or damage to
tool components.
Fasteners:
Paslode .131-.148" Positive Placement
®
Nails
Magazine
Capacity:
1 nail strip, or 29 fasteners.
Battery :
7V
DC - Provides enough energy to
drive approximately 9,000 fasteners per
charge.
Fuel
Cartridge:
Fuel cartridge
- Provides enough fuel
to drive approximately 800 fasteners.
Overview of the Paslode Cordless
1-1/2" Positive Placement
®
Nailer
By using this Paslode Cordless Nailer at its recommended
cycle rate, you will be able to drive several thousand nails
in a typical workday.
NOTE: Altitude Restriction
Paslode Cordless tools are powered by an internal
combustion engine and are effected by altitude. The
tool may lose power or not cycle consistantly at
elevations of 6000 feet (1,828 meters) or greater.
The Paslode Cordless 1-1/2" Positive Placement
®
Nailer
is a self-contained, fully portable nailer that uses liquid
hydrocarbon fuel to power a unique linear drive internal
combustion motor.
In order for you to fully understand the information
contained in this manual, you need a basic understanding
of the Cordless Nailer. As you can see in the illustrations
on the following page, this Nailer is made up of three
major areas: handle, motor, and magazine.
As you examine the Nailer, become familar with the three
major areas and the various components located in each
of them.
