background image

2

Contents

Subject 

Page

Introduction and Warranty ............................................................................................................................................... 3
An Overview of the Paslode Cordless 1-1/2" Positive Placement

®

 Nailer....................................................................... 4

Preparing the Paslode Cordless 1-1/2" Positive Placement

®

 Nailer for Use..................................................................14

Paslode Cordless 1-1/2" Positive Placement

®

 Nailer Operation.....................................................................................15

Safety Instructions ........................................................................................................................................................... 6
Battery and Charger ........................................................................................................................................................ 9
Fuel Cartridge

 

............................................................................................................................................................... 11

Servicing ........................................................................................................................................................................ 16
Troubleshooting

 ....................................................................................................................................................................................................

18

The battery charger system meets all safety requirements for power tools.

is a trademark

Paslode

An Ilinois Tool Works Company

155 Harlem Avenue  

Glenview, IL 60025

www.paslode.com

 Power Nailers are assembled in the U.S.A. 

Paslode

®

 is a member of:

RBRC

RBRC

Li-ion

Summary of Contents for CF150-PP























Reviews: