background image

Wireless Drop Counter 

(PS-3214)

Equipment Included

 Micro Stir Bar

 Wireless Drop Counter

 Syringe (60 mL)

 Stopcock Valves (2)

 Drop Tip

 Syringe Holder

 Micro USB Cable (1 meter; not shown)

Required Item

• PASCO Capstone or SPARKvue

Recommended Items

• Wireless pH Sensor (PS-3204)

• Wireless Temperature Sensor (PS-3201)

• Support Rod and Table Clamp

• Magnetic Stir Plate (SE-7700)

• Beaker (150 mL)

• Graduated Cylinder (10 mL)

Recommended Consumables

• 0.1 M NaOH

• 0.005 M HCl

 Hole for Support Rod

 Drop Indicator LED

 Bluetooth LED

 Device ID

 ON/OFF Button

 Battery LED

 Drop Window

 Hole for Temperature Sensor

 Hole for pH Sensor

Introduction

The PASCO Wireless Drop Counter is a versatile measuring
device that can connect to a computer or mobile device, either
wirelessly through Bluetooth or physically through a USB port. It
includes a rechargeable battery and a Micro USB Cable. It
measures the number of drops of fluid that fall through the
rectangular opening (drop window) of the sensor and converts
the drops into a volume. It is typically used in conjunction with a
pH sensor and other equipment to perform a titration. Data from
the Wireless Drop Counter and other sensors are recorded and
displayed using software such as SPARKvue or PASCO
Capstone. SPARKvue allows the sensor to work with a computer
or a mobile device such as a tablet or smartphone when the
sensor is connected. PASCO Capstone will work on a PC or
Mac.

The Wireless Drop Counter can be mounted on a support rod.
The counter is equipped with two integrated probe holders. The
included Micro Stir Bar fits onto the end of a pH probe or other
probe of the same diameter.

The included syringe, syringe holder, stopcock valves, and drop
tip can be assembled into a drop dispenser that can be mounted
on a support rod.

Product Guide | 012-16026B

1

Summary of Contents for PS-3214








Reviews: