PASCO PS-3214, Reference Manual, Page: 10 / 16

Wireless Drop Counter Assembling the Titration Setup (See figure on next
10
013-16026A
9. Touch or click the “Hardware Setup” icon to open the
“Configure Sensors and Measurements” menu.
• The menu shows the sensor name and the three
measurement choices. Note that each measurement has
a gear-shaped “Edit Data Properties” icon. Note that the
“Fluid Volume” measurement also has a “Calibrate
measurement” icon.
10. Click or touch the “Calibrate measurement” icon to open
the “Calibrate Sensor: Select Measurement” window.
11. In the “Calibrate Sensor: Select Measurement” window, touch or click “Continue” to open the “Calibrate
Sensor: Enter Values” window
• The “Calibrate Sensor Enter Value” window opens. Note that the window has a text area for “Standard Value:
10.0000........ ml” and a display area for “Sensor Value: 0.0000........ drops”
“Calibrate measurement” icon
“Edit Data Properties” icon