Getting star
Getting started
ted
Perform the tasks in this section before using this device in the
classroom.
Char
Charge the batter
ge the batteryy
Connect the Wireless CO
₂
Sensor USB port
to a USB charger
using the included USB cable. The battery light
displays yellow
while charging and changes to green when fully charged.
Get the softwar
Get the softwaree
You can use the Wireless CO
₂
Sensor with SPARKvue or PASCO
Capstone software. If you're not sure which app to use, visit
pasco.com/products/guides/software-comparison
pasco.com/products/guides/software-comparison for help. SPARKvue
is available as a free app for Chromebook, iOS, and Android devices.
We offer a free trial of SPARKvue and Capstone for Windows and Mac.
W
W
INDOWS
AND
M
M
AC
C
C
HROMEBOOK
, ,
I
OS,
OS,
AND
A
A
NDROID
Go to pasco.com/downloads
Search for SPARKvue
SPARKvue in your
device's app store.
If you already have the software, check that you have the latest
update installed:
SP
SPARK
ARKvue
vue
Go to the Main Menu
Main Menu
then select Check for Updates
Check for Updates.
P
PASCO Capst
ASCO Capstone
one
In the menu bar, click Help
Help then select Check for updates
Check for updates.
Connect t
Connect to the softwar
o the softwaree
SP
SPARK
ARKvue
vue
1. Press and hold the power button
until the lights turn on.
2. Open SPARKvue.
3. Select Sensor Data
Sensor Data on the Welcome Screen.
4. Select the Wireless CO
₂
Sensor that matches its device ID.
Important:
Important: You may be prompted to update the firmware if
a new version is available. If so, click Yes
Yes to update the
firmware.
5. Note that the CO2 Concentration
CO2 Concentration measurement is selected by
default.
6. Select a template to display the data.
P
PASCO Capst
ASCO Capstone
one
1. Press and hold the power button
until the lights turn on.
2. Open PASCO Capstone.
3. Click Hardware Setup
Hardware Setup.
4. Select the Wireless CO
₂
Sensor that matches its device ID.
Important:
Important: You may be prompted to update the firmware if
a new version is available. If so, click Yes
Yes to update the
firmware.
5. Click Hardware Setup
Hardware Setup again to close the panel.
6. Click Sensor Data
Sensor Data to display a graph of CO2 Concentration versus
Time.
2 | Wireless CO2 Sensor
