background image

®

Model No. PS-2230

 Technical Support

15

012-14325A

Technical Support

For assistance with any PASCO product, contact PASCO at:

Limited Warranty

For a description of the product warranty, see the PASCO catalog.

Copyright

The PASCO scientific 012-14325A 

Advanced Water Quality Sensor Instruction Manual

 is copyrighted with all rights reserved. Permis-

sion is granted to non-profit educational institutions for reproduction of any part of this manual, providing the reproductions are used 
only in their laboratories and classrooms, and are not sold for profit. Reproduction under any other circumstances, without the written 
consent of PASCO scientific, is prohibited.

Trademarks

PASCO, PASCO scientific, Capstone, SPARKvue/SPARK SLS, MultiMeasure Sensors, PASPORT, and Xplorer GLX are trademarks 
or registered trademarks of PASCO scientific, in the United States and/or in other countries. All other brands, products, or service 
names are or may be trademarks or service marks of, and are used to identify, products or services of, their respective owners. For 
more information visit www.pasco.com/legal.

Product End of Life Disposal Instructions:

This electronic product is subject to disposal and recycling regulations that vary by country and region. It is your 
responsibility to recycle your electronic equipment per your local environmental laws and regulations to ensure that it 
will be recycled in a manner that protects human health and the environment. To find out where you can drop off your 
waste equipment for recycling, please contact your local waste recycle/disposal service, or the place where you pur-
chased the product.

The European Union WEEE (Waste Electronic and Electrical Equip-
ment) symbol (to the right) and on the product or its packaging indicates 
that this product must not be disposed of in a standard waste container.

Address: PASCO scientific

10101 Foothills Blvd.
Roseville, CA 95747-7100

Phone:

916-462-8384 (worldwide)
877-373-0300 (U.S.)

Web:

www.pasco.com

Email:

[email protected]

Summary of Contents for PASPORT PS-2230

















Reviews: