![background image](http://html1.mh-extra.com/html/pasco/me-9825/me-9825_instruction-manual_3910653006.webp)
!
Model No. ME-9825
Matter Model
6
Increasing the Mass of the Atom
1.
Position one hex nut between two atom halves and snap together. See
Figure 3.
Assembling A Longitudinal Wave Model
1.
Seat the single closed winding at either end of a spring inside a cleat
feature of an assembled atom model (with nuts).
2.
Create desired longitudinal wave model by alternately assembling
atom models and springs onto tube as shown in Figure 4.
Figure 3: Snap together atom halves with nut
Figure 4: Assembly of Longitudinal Wave Model