PASCO ME-9430, Instruction Manual And Experiment Manual

Page: 3 / 30

012-04840E
Dynamics Cart
®
Equipment Return
If this product requires return to PASCO scientific, for
whatever reason, notify PASCO scientific by letter or
phone BEFORE returning the product. Upon notification,
the return authorization and shipping instructions will be
promptly issued.
NOTE:
NO EQUIPMENT WILL BE ACCEPTED
FOR RETURN WITHOUT AN AUTHORIZA-
TION.
When returning equipment for repair, the units must be
properly packed. Carriers will not accept responsibility
for damage caused by improper packing. To be certain
the unit will not be damaged in shipment, observe the
following rules:
1. The carton must be strong enough for the item
shipped.
2. Make certain there is at least two inches of packing
material between any point on the apparatus and the
inside walls of the carton.
3. Make certain that the packing material can not shift in
the box, or become compressed, thus letting the instru-
ment come in contact with the edge of the box.
Address: PASCO scientific
10101 Foothills Blvd.
Roseville, CA 95678-9011
Phone: (916) 786-3800
FAX: (916) 786-3292
Email: techsupp@pasco.com
Web: www.pasco.com
Credits
This manual authored by: Scott K. Perry
This manual edited by: Dave Griffith
Copyright Notice
The PASCO scientific Model ME-9430 Dynamics Cart
with Mass Manual is copyrighted and all rights reserved.
However, permission is granted to non-profit educational
institutions for reproduction of any part of this manual,
providing the reproductions are used only for their
laboratories and are not sold for profit. Reproduction
under any other circumstances, without the written
consent of PASCO scientific, is prohibited.
Limited Warranty
PASCO scientific warrants this product to be free from
defects in materials and workmanship for a period of one
year from the date of shipment to the customer. PASCO
will repair or replace, at its option, any part of the product
which is deemed to be defective in material or workman-
ship. This warranty does not cover damage to the product
caused by abuse or improper use. Determination of
whether a product failure is the result of a manufacturing
defect or improper use by the customer shall be made
solely by PASCO scientific. Responsibility for the return
of equipment for warranty repair belongs to the customer.
Equipment must be properly packed to prevent damage
and shipped postage or freight prepaid. (Damage caused
by improper packing of the equipment for return shipment
will not be covered by the warranty.) Shipping costs for
returning the equipment, after repair, will be paid by
PASCO scientific.
Copyright, Warranty and Equipment Return
Please— Feel free to duplicate this manual
subject to the copyright restrictions below.
i