4. Pull out the baseplate from the cart then slowly lift
the block off the cart.
5. Remove the old axles and place the new axles over
the springs.
Note:
Note: Be sure to keep the springs and magnets
in the proper orientation. Rearranging or moving
any items could change the operational capability
of the cart.
6. Use the block to depress the new wheels then re-
insert the baseplate.
7. Use the Phillips head screw driver to re-affix the end
cap.
P
PAScar and GOcar Axle Replacement
AScar and GOcar Axle Replacement
CAUTION:
CAUTION: Cart springs may eject suddenly when
disassembling the cart. Wear safety goggles.
1. Using a T10 Torx screwdriver, loosen the screws and
remove the bottom cover plate.
Note:
Note: The screws are thread-forming screws
and may require substantial force to remove and
reinstall.
2. With the car in a stable position, gently lift the
wheel-axle assemblies from the plastic grooves.
Note:
Note: Be sure to keep the components such as
springs, plunger, nuts and magnets in their proper
orientation as shown in the diagram. Rearranging
or moving these items could change the
operational capability of the PAScar.
3. Place the wheel-axle assemblies over the suspension
springs.
4. Place the bottom plastic cover over the axles. Align
the bottom cover flush with the frame. Replace the
screws and tighten them until the cover fits snugly
against the outside frame.
Note:
Note: When replacing the cover, be careful not
to knock the plunger trigger release spring or the
plunger spring from their holding places.
TTechnical Suppor
echnical Supportt
Contact PASCO Technical Support for assistance with
this or any other PASCO product.
Phone
1-800-772-8700 (Option 4)
+1 916 462 8384
Online
pasco.com/support
W
Warr
arranty
anty, Cop
, Copyright, and T
yright, and Trrademarks
ademarks
Limited W
Limited Warr
arranty
anty
For a description of the product warranty, see the Warranty and Returns page at
www.pasco.com/legal
Cop
Copyright
yright
This document is copyrighted with all rights reserved. Permission is granted to non-profit
educational institutions for reproduction of any part of this manual, providing the
reproductions are used only in their laboratories and classrooms, and are not sold for profit.
Reproduction under any other circumstances, without the written consent of PASCO
scientific, is prohibited.
TTrrademarks
ademarks
PASCO and PASCO scientific are trademarks or registered trademarks of PASCO scientific, in
the United States and/or in other countries. All other brands, products, or service names are
or may be trademarks or service marks of, and are used to identify, products or services of,
their respective owners. For more information visit www.pasco.com/legal
Cart Replacement Axles | ME-6957
Product Guide
2
012-16990A
