![background image](http://html1.mh-extra.com/html/pasco/me-5717a/me-5717a_quick-start-manual_3878954007.webp)
Set up the pulley with a cart and track
The Super Pulley is designed to clamp onto the end of a dynamics track. The pulley can
be adjusted so that a string attached to the upper or lower tie point of a cart is parallel
with the track.
Figure 4. Super pulley setup with string attached to the upper and lower tie point on a cart.
1. Place the pulley at the end of the track. Gently turn the thumbscrew to secure the
pulley.
error_outline
CAUTION:
Do not apply excessive force when tightening the thumbscrew
to avoid damaging the screw.
2. Tie a string to the upper or lower tie point on the cart and run the string over the
pulley. Attach a mass to the other end of the string.
emoji_objects
TIP:
When the string is attached to the lower tie point, the string can be run
under an end stop, another cart, or a Motion Sensor.
3. Adjust the height of the pulley to make the string parallel to the track.
Product Guide | 012-16827A
7