ME-1245
Smart Ballistic Cart Accessory
012-16366A
Components
1 Power button
Press and hold to turn the power on or off.
5 Timed release button
Press and hold to launch the projectile.
2 Battery status LED
Red blink
Battery needs to be recharged soon.
Green solid Battery is fully charged.
Yellow solid Battery is charging.
6 Ready status LED
Yellow blink Ready to launch.
Yellow solid Launch mechanism is recharging.
3 Aim adjustment knob (2)
Turn the knob to adjust the aim of the projectile.
7 Smart Cart port
For connecting the accessory to a Smart Cart.
4 Mounting thumbscrew (2)
For mounting the accessory to a cart.
8 Micro USB port
For connecting the included USB cable to a charger to
charge the battery.
WARNING
Wear safety glasses. Do not look down the barrel.
Getting Started
Before using the device with students for the first time,
perform the following tasks:
1. Charge the battery.
If using the accessory with a Smart Cart:
2. Update your PASCO data collection software.
3. Update the firmware of your Smart Cart.
To charge the battery
1. Connect the USB cable to the USB port on the
Smart Ballistic Cart Accessory. Connect the other
end of the cable to a USB charger or port.
2. Allow the battery to charge for at least three
hours. The battery status LED will turn green
when fully charged.
Charging automatically stops when the battery is fully
charged. The device can remain connected to a power
source when fully charged without damaging the battery.