®
Introduction
Modular Circuits for Essential Physics
2
012-15360A
Storage: Top Layer
Put modules together by slipping the round pegs on the edges of one module into the round notches on
the edge of the next module. Each module has two or three clip holders. Connect modules electrically by
pushing a jumper clip down into adjacent clip holders. (See Figure 1 on page 3.)
Experiments
See the Modular Circuits for Essential Physics page at the PASCO Web site (www.pasco.com) for infor
-
mation about experiments designed for the EM-3536. The Web page includes a video that is a brief intro
-
duction to the Modular Circuits.
Note that the 0.22 farad Capacitor Module is designed for qualitative demonstrations with the Light Bulb
Modules and is not the best choice for a resistor-capacitor (RC) circuit experiment. Try the 100 microfarad
(µF) or 330 µF capacitors instead.
Item
ID
Item
ID
Corner Module
1
Straight Module
2
Tee Module
3
Current Sensor Module
4
3
2
4
2
2
1
2
1
1
1
Storage Area