background image

www.parweld.com

17

9.2 WEEE Statement

WEEE (Waste Electrical & Electronic Equipment) 2012/19/EC
 
In relation to implementing the legislation, Parweld has established relevant recycling and recovery methods.  We have been fully compliant 

against the marking requirements since August 2005. Parweld is registered in the UK with the Environment agency as detailed below.  For 

WEE compliance outside the UK please contact your supplier/Importer

Parweld is registered with a compliance scheme Official registration number is WEE/FD0255QV

When your equipment reaches the end of its service life you should return it to Parweld where it will be reconditioned or processed for 

recycling.

9.3 Statement of Warranty

Limited Warranty: 
Parweld Ltd, hereafter, “Parweld” warrants its customers that its products will be free of defects in workmanship or material. Should any failure 

to conform to this warranty appear within the time period applicable to the Parweld products as stated below, Parweld shall, upon notification 

thereof and substantiation that the product has been stored, installed, operated, and maintained in accordance with Parweld’s specifications, 

instructions, recommendations and recognized standard industry practice, and not subject to misuse, repair, neglect, alteration, or accident, 

correct such defects by suitable repair or replacement, at Parweld’s sole option, of any components or parts of the product determined by 

Parweld to be defective.

Parweld makes no other warranty, express or implied. This warranty is exclusive and in lieu of all others, including, but not limited to any 

warranty of merchantability or fitness for any particular purpose.

Limitation of Liability: 

Parweld shall not under any circumstances be liable for special, indirect or consequential damages, such as, but not limited to, lost profits and 

business interruption. The remedies of the purchaser set forth herein are exclusive and the liability of Parweld with respect to any contract, or 

anything done in connection therewith such as the performance or breach thereof, or from the manufacture, sale, delivery, resale, or use of any 

goods covered by or furnished by Parweld whether arising out of contract, negligence, strict tort, or under any warranty, or otherwise, shall not, 

except as expressly provided herein, exceed the price of the goods upon which such liability is based. No employee, agent, or representative 

of Parweld is authorized to change this warranty in any way or grant any other warranty.

Purchaser’s rights under this warranty are void if replacement parts or accessories are used which in Parweld’s sole judgement may impair the 

safety or performance of any Parweld product.

Purchaser’s rights under this warranty are void if the product is sold to purchaser by non-authorized persons.

The warranty is effective for the time stated below beginning on the date that the authorized Distributor delivers the products to the purchaser. 

Notwithstanding the foregoing, in no event shall the warranty period extend more than the time stated plus one year from the date Parweld 

delivered the product to the authorized distributor.

W

eee

Summary of Contents for XTT 207 DV P



















Reviews: