www.parweld.com
6
5.1 unpacking the Machine
Carefully remove the unit from the packaging, we recommend you
retain the packaging until the unit has been fully installed and tested
incase it has been damaged in transit and has to be returned to the
re-seller.
5.2 location
Be sure to locate the unit according to the following guidelines:
In areas, free from moisture and dust.
Ambient temperature between 0-40
0
C.
In areas, free from oil, steam and corrosive gases.
In areas, not subjected to abnormal vibration or shock.
In areas not exposed to direct sunlight or rain.
Place at a distance of 12” (300 mm) or more from walls or similar
that could restrict natural airflow for cooling.
Do not obstruct any of the cooling vents
4.0 Description of Controls
1) ON OFF Switch for switching on or off the mains supply to the
machine. Note the output of the machine is permanently on unless
the on/off switch is in the off position.
2) Mains input fuse for protection of the unit in case of malfunction.
3) Water filling spout.
4) Water level indicator
5) Water return connection (Red). In
6) Water supply connection (Blue). Out
7) Mains input cable
5.0 Installation
read entire installation section before starting installation.
SaFetY preCautIOnS
• ELECTRIC SHOCK can kill.
• Only qualified personnel should perform this installation.
• Only personnel that have read and understood the Operating
Manual should install and operate this equipment.
• Machine must be grounded per any national, local or other
applicable electrical regulations.
• The power switch is to be in the OFF position when installing
work cable and electrode cable and when connecting other
equipment.
1
2
4
3
CO
ntr
O
lS
5
6
7
Part Rear
View
Part Rear
View
