Parvus PRV-1059, User Manual

Page: 17 / 27

PRV-1059 User Manual
Software Guide
This section describes how to use the VLAN GUI program to set up VLAN configurations on the PRV-1059. A
screen shot of the program is shown below.
Figure 4) VLAN GUI Window
Com Port
In order to program the PRV-1059, the computer running the software must be connected to the serial port of the
switch. The default COM port for the host computer is set to COM 1. If the user uses a different COM port, the
COM port setting can be changed by selecting the COMM menu located at the top left of the GUI window.
MNL-0490-01 RevD4 REF. ECO-3163 Effective: 01 Feb 10 Page 17 of 27