Instruction Manual – PGL-TERA
© Parus - Europe
Revision v1.3 Feb 2017
Guarantee conditions
Your product is covered by a 2-year guarantee. The guarantee is valid from the date of purchase as shown
on your receipt. To make a guarantee claim, please contact the reseller from whom you purchased the
product.
Exception from the guarantee commitment
The guarantee will be invalided in any of the following events:
• if the product has been modified or redesigned
• if the product has been connected to a dimmer
• if the product has been connected to the wrong voltage or to a dimmer control device
• if the product has been used outside the recommended temperature range
• if the product has been subjected to mechanical damage, e.g. dropped on a concrete floor
• if the product has been dismantled for troubleshooting/repairs
Read the user instructions before using the product. Save the instructions for future reference.
Safety instructions
Before using the light, read and follow these instructions:
• the light is NOT intended for outdoor use
• unplug the power cord when you clean, disinfect or move the product
• disconnect the power if the electrical connections to the device get wet
• only use spare parts and consumables for this product as provided by the manufacturer
• temperature range +16°C – +26°C
• make sure your hands are dry during installation
• never use the product in a sealed compartment; always allow air to circulate around it
• do not connect the product to a dimmer
• do not look directly at the light when it is on
• take care when connecting the product to avoid electric shocks
• the product’s heat sinks will become hot (35–50°C) during use
• all electrical installation work required to install the product must be performed by a qualified
professional
• do not use the product if it fails to light up, starts blinking or emits a weak light
• In the event of malfunction, switch off the unit immediately. Never try to repair the product yourself, since
this could cause serious damage and invalidate the guarantee
General information
Many indoor plants come from parts of the world where the daytime hours and light conditions are very
different to our own. Growing indoors therefore places particularly high demands on the lighting. With the
right light source, you can grow herbs and plants indoors and additionally enhance comfort for us humans.
Technical function
The product consists of a light source (LED) with wavelengths that are optimized to boost plants’
health and growth.
Storage and maintenance
Store the light and packaging out of children’s reach. The LED has no replaceable parts.
