PartySpace MAGMA, Manual

Page: 17 / 76

Step 8: Check if the connection of the vertical
post and the burner are assembled according
to the instructions and if all bolts and nuts are
tightened.
Step 9: Put three flat washers on the three
reflector spacers.
GAS HEATER | MANUAL
Reflector spacer
OPTIONAL STEP - TABLE ASSEMBLY
Attach the table connector (E) to the
table (D).
Turn the handle of the connector
clockwise.
Put the pole through the hole in the
middle of the table.
Turn the table clockwise to tighten it
and counter-clockwise to loosen it.
Note: If the table cannot be tightened,
turn the handle of the connector
counter-clockwise a little, then turn
the table clockwise to tighten.
Loosen
Tighten
17
EN