/ Managing the Smart Key Band /
•
When the Smart Key Band has been unused for extended periods more 3month, it may harm battery performance or reduce battery life. Keep it well
after fully charge the battery and turn the Smart Key Band off.
•
The battery life can vary for your environment and degree of use.
•
Do not the product is dropped or impacted. It may cause failure for the function or exterior. Keep in places where vibration and shock do not occur.
•
Keep the product away from fire, direct sunlight, and store in a place free from moisture, dust and pollution.
•
Do not used and store your device in very hot or very cold area. It is recommended to use and store your device at temperatures from -
10℃ to 60℃
.
•
Do not store the smart key band and charging cradle in a vehicle or in direct sunlight or in a high temperature.
✓
Do not exposure to strong direct sunlight or heat. It may cause leakage, overheating, or explosion of the battery, resulting in fire, burns, or other
disasters. In addition, high temperatures can cause external deformations or other damage.
•
When connecting the charging cradle to charge the product, check the connection direction of the charger terminal and the cradle USB cable. Do not
apply excessive force.
•
Do not leave the Smart Key Band where high pressure water (tap water, waterfalls and waves) can be splashed on the product, or use it underwater.
•
Do not use when water sports such as diving, swimming, snorkeling.
✓
Your device has been tested in a controlled environment and certified to be water- and dust-resistant in specific situations and conditions. (Meets
the requirements of the water- and dust-resistance as described by the international standard IEC 60529 IP68.)
However, it may not resist water and may become damaged by water in certain circumstances.
•
If the product or your hands is wet by water, It must to completely dry after wipe a soft towel.
•
If the product is exposed to liquid (such as brine, pool water, soap, oil, perfume, sun cream, hand cleaner, cosmetics, etc.), immediately rinse with clean
water and completely dry. It may cause failure for performance or exterior.
•
Do not clean the product with soap, detergent, abrasive material, compressed air, ultrasonic. Do not use a heating device such as a hair dryer.
12
