Partner SP-850, Service Manual

Page: 37 / 75

29
Security Settings
This screen allows you to configure the system security settings.
Figure 2.19 Security
Settings Screen
Create or Change Adminitrator/ User Password
An administrator password takes precedence over a user password, and the administrator can limit the
activities of a user. To create or change a password, follow these steps:
1. Highlight the item Administrator/ User Password on the Security menu and press <Enter>.
2. The password dialog box appears.
3.
If you are creating a new password, type in the password. You can type alphanumeric characters.
Symbols are ignored. The Administrator/ User Password item differentiates between upper and lower
case characters. Press <Enter> after you have typed in the password. To confirm the password, type the
password again and press <Enter>.
4. Write the passwords down and keep them in a safe place.
Clear Adminitrator/ User Password
To clear the password, leave the dialog box blank, press <Enter>, when the confirm box appears, press
<Enter> again.