8
C H A P T E R 1 G E T T I N G S TA R T E D
Powering the machine on and off
Refer to the following to power on and off the machine.
1. Locate the I/O panel that is at the
bottom of the machine.
2. Connect the power cable to the DC-
IN connector located on the right
side of the SP-1000-BZ I/O panel.
3. Plug the power cable into an
electrical outlet.
Using adap-
tor higher than
12V/7.5A may
damage the
system.
CAUTION
4. Press the power button, it’s at the
bottom right of the machine. The
power LED turns on.
5. To turn off the machine, shut down
the operating system. The main
power turns off automatically.
NOTE
You may need to force power off the machine, for example if the operat-
ing system you are using does not support power down by the OS or if
the system crashes or hangs. To force power off , long press the power
button for five seconds.
