20
BIOS Setup Utility
IDE Primary/Secondary Master/Slave
This field is used to configure the IDE hard drive installed in the system. Move the cursor to highlight the IDE Pri-
mary/Secondary Master/Slave fields and press <Enter>. The IDE Primary Master submenu opens:
Figure 3.3
IDE Primary Master submenu
IDE HDD Auto-Detection
Press
Enter
while this item is highlighted if you want the Setup Utility to automatically detect and configure a hard
disk drive on the IDE channel.
IDE Primary/Secondary Master/Slave
If you leave this item at
Auto
, the system will automatically detect and configure any IDE devices it finds. If it fails to
find a hard disk, change the value to
Manual
and then manually configure the drive by entering the characteristics of
the drive in the fields described below:
•
Capacity
– displays the capacity of the HDD in megabytes (MB).
•
Cylinder
– indicates the number of cylinders that the HDD has. A cylinder is the sum total of all tracks that are
in the same location on every disk surface.
•
Head
– displays the number of heads in the HDD. A head is a device that reads and writes data on the hard
disk.
•
Precomp
– displays the track where precompensation is initiated. Precompensation is a feature whereby the
HDD uses a stronger magnetic field to write data in sectors that are closer to the center of the disk. In CAV
recording, in which the disk spins at a constant speed, the sectors closest to the spindle are packed tighter than
the outer sectors.
•
Landing Zone
– displays the location of the safe non-data area on a hard disk that is used for parking the read/
write head.
•
Sector
– displays the number of sectors available on the HDD. A sector is the smallest unit of storage space on
a disk.
NOTE
If you are setting up a new hard disk drive that supports LBA mode, more than
one line will appear in the parameter box. Choose the line that lists LBA for an
LBA drive.
P
hoenix – AwardBIOS CMOS Setup Utility
IDE Primary Master
IDE HDD Auto-Detection
[Press Enter]
Item Help
IDE Primary Master
[Auto]
Access Mode
[Auto]
Menu Level
``
Capacity
40022 MB
To auto-detect the
HDD’s size, head...on
Cylinder
19158
this channel
Head
16
Precomp
0
Landing Zone
19157
Sector
255
ÇÈÅÆ
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Summary of Contents for PT-6900
