Partner OT-110, User Manual, Page: 6 / 98

iv
Safety information
Before installing and using the OT-110, take note of the following precautions:
Request service for damaged products:
Turn off the product, unplug it from the electrical outlet, and
request service from a service partner under the following conditions:
• The power cord or plug is damaged.
• Liquid has been spilled into the product.
• An object has fallen into the product.
• The product has been exposed to rain or water.
• The product has been dropped or damaged.
• The product does not operate normally when you follow the operating instructions.
Avoid hot areas: The product should be placed away from heat sources such as radiators, heat registers,
stoves, and other products (such as amplifiers) that produce heat.
Allow the product to cool:
Allow the product to cool before removing covers and touching internal
components.
Avoid wet areas: Never use the product in a wet location.
Avoid inserting objects into product:
Never insert objects of any kind into slots or other openings in the
product.
Clean the product properly: Unplug the product from the wall outlet before cleaning it. Do not use liquid
cleaners or aerosol cleaners. Use a soft cloth dampened with water for cleaning exterior components, but
NEVER apply water directly to the product or to an LCD screen.
Use the product with approved equipment: Use your product only with the computers and accessories
identified as suitable for use with your product.
Adjust the volume:
Turn down the volume before using headphones or other audio devices.
When device will not be used for a long period of time, please remove the battery, and store both device
and battery in a cool, dark, and dry place. For storage over a long period of time, please place product
in a dry box.
SAR compliance for body-worn operations requires at least 2 cm of separation between the device and
the user’s body.