manualshive.com logo in svg

Partner OT-110, User Manual, Page: 5 / 98

Share
Download
Partner OT-110 User Manual Download Page 5

iii

Revision history 

Version 1.0, July 2011
Version 1.1, November 2011
Version 1.2, March 2012

About this manual 

This manual is intended for system administrators who are familiar with setting up a new system and 

installing programs. 
The manual consists of the following sections: 

 

Chapter 1 Getting Started:  This section covers unpacking and checking the 

package contents, identifying components, charging 

the battery, installing the microSD card, and powering 

on the device.

 

Chapter 2 Using The Device:  This section provides information on how to use the 

device features.

 

Chapter 3 Using The Accessories:  This section provides information on how to use the 

accessories.

 Chapter 4 Installing The Optional Modules:  This section provides steps to install and test the 

optional modules.

 

Appendix:  The appendix covers troubleshooting, information 

on having the OT-110 serviced and technical 

specifications. 

Summary of Contents for OT-110



































































































Reviews:

No comments